QXME OLBS; N-Oleyl-1,3 Propylene Diamine; Asphalt Emulsifier

Benefits and features

● Active adhesion.

Treated bitumen has the ability to displace water and finds use in spray applications whenever the aggregate could be wet or in mix operations at lower temperatures.

● Easy to use.

The product has significantly lower viscosity than other concentrated adhesion promoters, even in cool temperatures, which makes dosing easier.

● Patch mix.

The excellent active adhesion of the product makes it the best choice for patch mix based on cut back and fluxed bitumens.

● Emulsion quality.

The quality of cationic rapid and medium setting emulsions for mix and surface dressing applications is improved by addition QXME OLBS emulsions for mix and surface dressingAdvantages: QXME-103P is used to prepare rapid and medium setting emulsions with the following advant ages:

1. Low dosage down to 0.2% based on emulsion.

2. Partiuarly high viscosities which helps prevent settlement of emulsion during storage and run-off in surface dressing.

3. Effective for emulsions with low solid content.

Typical properties:  

Chemical and physical date    Typical values.

Appearance at 20°C   Hard white to yellow paste.

Density,60℃  790 kg/m3.

Pour point  45℃.

Flash point   >140℃.

Viscosity,60℃  20 cp.

Packaging and storage: QXME- 103P is delivered in steel drums ( 160 kg). The product is stable for a minimum of three years in its original closed container below 40°C.

FIRST AID MEASURES

General advice: lmmediate medical attention is required.

Move out of dangerous area.

Show this safety data sheet to the doctor in attendance. Burns may occur several hours after the removal of the product.

Inhalation: Obtain medical attention immediately.

Skin contact:

Take off contaminated clothing and shoes immediately.

Carefully remove paste or solidified product.

Wash skin immediately with 0,5 % acetic acid in water, and then with soap and water.

lmmediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

Skin irritation, if untreated may be prolonged and serious (eg necrosis). This may be prevented by early treatment with medium strength corticosteroids.

Eye contact:  In case of contact with eyes, rinse immediately with 0.5% acetic acid in water for a few minutes, followed by rinsing with plenty of water for as long as possible. Eyelids should be held away from the eyeball to ensure thorough rinsing.